TREC Approved Course #Pending Approval
8-hours Continuing Education
Tools for the Inspector & Best Use Practices
Overview
Inspectors have access to a wide variety of tools, each chosen according to personal preference and the requirements of the inspection. In this training, participants will learn about essential and specialty tools commonly used in inspections. An inspector panel will share insights into their preferred equipment, and attendees are encouraged to bring their favorite tools for a show-and-tell session, explaining their choices and usage.
This will be a fun outside the tool box training course you still get to earn 8 hours of TREC Approved CE Credit.
Minimum Required Equipment
Home inspectors are only required to use a few types of equipment to comply with TREC Standards of Practice. In theory, an inspection can be performed using just four items: a flashlight, an electrical tester capable of testing ground-fault circuit interrupter (GFCI) devices, a ladder, and a screwdriver. Additionally, inspectors must provide a written report documenting their findings.
Enhancing Inspection Value
While the basic tools fulfill regulatory requirements, inspectors often utilize additional equipment to increase the value of their inspections. Devices such as moisture meters, infrared cameras, and foundation elevation equipment enable inspectors to detect conditions that are not visible during a standard inspection. Though not required by the Standards of Practice, using these advanced tools can provide a competitive advantage by offering more thorough and valuable inspections.
Improving Efficiency and Access
Some equipment is used to make the inspection process easier or more efficient. For example, infrared thermometers allow inspectors to measure the temperature of heating and cooling system registers in hard-to-reach locations, such as under furniture, ensuring a comprehensive assessment without moving heavy objects.
Essential Tools & Equipment
- Lighting: Bright LED flashlight, headlamp, inspection mirror.
- Electrical: GFCI/AFCI tester, non-contact voltage tester, screwdrivers.
- Measurement: Foundation elevation equipment, tape measure, level, laser thermometer, moisture meter.
- Safety: Gloves, respirator/dust mask, safety glasses, knee pads, coveralls, shoe covers, road cones, "Danger" signs.
- Advanced Tech: Thermal imaging camera, combustible gas detector, carbon monoxide detector, borescopes, drone (optional).
- Documentation: Digital camera, tablet or laptop, inspection software.
- General: Ladders (step, telescoping), multi-bit screwdriver set, telescoping magnet.
Best Practices
- Prioritize Safety: Always wear appropriate personal protective equipment (PPE) such as gloves and masks. Use safety signs and cones, especially in hazardous areas like attics, crawlspaces, and on roofs.
- Be Prepared: Carry multiple flashlights, keep backup batteries, and follow a methodical inspection approach.
- Inspect Thoroughly: Examine areas behind appliances when accessible, look inside vents and flues using mirrors, test all outlets, and assess critical systems like HVAC and plumbing.
- Document Everything: Take high-quality photos and maintain detailed notes using inspection software to ensure clear and complete reporting.
- Use Technology Wisely: Employ infrared cameras and gas detectors to uncover issues not visible to the naked eye, recognizing that these tools supplement but do not replace core inspection practices.
Sign Up Today!
Registration starts at 7 am the day of the course.
Class starts at 8 am.
